IEI Technology KINO-DAL-E1W2, User Manual, Page: 79 / 151

KINO-DAL SBC
Page 65
4.7 System Configuration
The system configuration is controlled by buttons, jumpers and switches. The system
configuration should be performed before installation.
4.7.1 AT/ATX Mode Select Switch
The AT/ATX mode select switch (SW_A/T1) specifies the systems power mode as AT or
ATX. AT/ATX mode select switch settings are shown in Table 4-1 .
Setting Description
Short A-B ATX Mode (Default)
Short B-C AT Mode
Table 4-1: AT/ATX Mode Select Switch Settings
The location of the AT/ATX mode select switch is shown in Figure 4-15 below.
Figure 4-15: AT/ATX Mode Select Switch Location