IEI Technology KINO-DAL-E1W2, User Manual, Page: 70 / 151

KINO-DAL SBC
Page 56
4.3 SO-DIMM Installation
To install an SO-DIMM, please follow the steps below and refer to Figure 4-1 .
Figure 4-1: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket. Place the board on an anti-static mat.
Step 2: Align the SO-DIMM with the socket. Align the notch on the memory with the
notch on the memory socket.
Step 3: Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1 )
Step 4: Seat the SO-DIMM. Gently push downwards and the arms clip into place. (See
Figure 4-1 )
CAUTION:
For dual channel configuration, always install two identical memory
modules that feature the same capacity, timings, voltage, number of
ranks and the same brand.