IEI Technology KINO-9652, User Manual, Page: 218 / 269

KINO-9652 Mini-ITX SBC
Page 196
8.1 Intel
®
AMT Setup Procedure
The KINO-9652 is featured with the Intel® Active Management Technology (AMT) 2.5. To
enable the Intel® AMT function, follow the steps below.
Step 1: Make sure the DIMM 1 socket is installed with one DDR2 DIMM.
Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN2_USB2 .
Step 3: The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,
including:
Intel® AMT Configuration [Advanced] (see Section 6.3.5 )
ME Subsystem Configuration [Chipset] (see Section 6.7.3 )
Step 4: Configure the Intel® Management Engine BIOS extension (MEBx)
(see Section 8.2 below)
Step 5: Properly install the Intel® AMT drives. Make sure to install both HECI and
LMS_SOL drivers from the iAMT Driver & Utility directory in the driver CD (see
Section 7.9 ).
Step 6: The following dialog window is displayed after the OS is loaded to show the
Intel® AMT status on the KINO-9652 is enabled. Step 0:
Figure 8-1: Intel® Active Management Technology Status Dialog