IEI Technology KINO-9152G4, User Manual, Page: 120 / 232

KINO-9152G4 Mini-ITX Motherboard
Page 100
Figure 5-20: PCIe x16 Installation
Step 1: Locate the PCIe x16 socket . Place the KINO-9152G4 on an anti-static pad with
the solder side facing up.
Step 2: Align the PCIe x16 card with the socket . The PCIe x16 card must be aligned
so the notch on the PCIe x16 card aligns with the plastic bridge in the socket.
Step 3: Insert the PCIe x16 card . Push the PCIe x16 card into the socket,
perpendicular to the KINO-9152G4. (See Figure 5-6 )
Step 4: Secure the PCI x16 card . Push the PCIe x16 card down until the clip engages,
securing the card in place. Step 0:
5.6.7 SATA Drive Connection
The KINO-9152G4 is shipped with two SATA drive cables and one SATA drive power
cable. To connect the SATA drives to the connectors, please follow the steps below.
Step 1: Locate the connectors . The locations of the SATA drive connectors are shown
in Chapter 3 .