IEI Technology KINO-780AM2, User Manual

Page: 79 / 131

KINO-780AM2 Motherboard
Page 67
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
OnChip SATA Channel
[Enabled]
OnChip SATA Type [Native IDE]
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
> S_SATA1 Channel
: [Not Detected]
> S_SATA2 Channel : [Not Detected]
> S_SATA3 Channel : [Not Detected]
> S_SATA4 Channel : [Not Detected]
Options
Enabled
Disabled
ÅÆ
Select Screen
↑ ↓
Select Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 4: IDE Configuration
ƒ
OnChip SATA Channel [Enabled]
Toggles the SATA channels on and off
ƒ
Enabled D
EFAULT
ƒ
Disabled
ƒ
OnChip SATA Type [Native IDE]
Specifies the operating mode for the SATA connections.
Î
Native IDE D
EFAULT
Configured to transmit data with using traditional
IDE interface. This is the most compatible mode.
Î
Raid Mode
The SATA connectors are setup in a RAID
configuration. To set the RAID options, install more
than one drive to the SATA connectors then setup at
the prompt after system startup.
Î
AHCI Mode
This is an enhanced mode for SATA hard drives.
5.3.2.1 SATA Channel
Sets the IDE configuration of the SATA channels.