IEI Technology IVS-100-BT, User Manual, Page: 43 / 120

IVS-100-BT Advanced Auto Data Server
Page 31
3.9 Power-On Procedure
3.9.1 Installation Checklist
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the IVS-100-BT, please make sure of the following:
The SIM card is installed
The bottom cover is installed
All peripheral devices (antenna, serial communications devices etc.) are
connected
The system is securely mounted
The power cables are plugged in
3.9.2 Power-on Procedure
To power-on the IVS-100-BT please follow the steps below:
Step 1:
Connect either the ACC power cable or the optional cigarette lighter power cable
from the IVS-100-BT to the vehicle.
Step 2:
To turn on the system, long press the power button for
five seconds
until the
power button lights up in blue. See
Figure 3-25
.