iSignager-800WL-N270 Digital Signage Player
Page 32
Step 3:
Remove the HDD from the bracket
by removing the four retention screws on
both sides.
Step 4:
Attach the HDD bracket to the new HDD.
To do this, align the four retention
screw holes on both sides of the HDD bracket with the retention screw holes on
the sides of the HDD. Insert four retention screws into the HDD bracket.
Connect the IDE cable to the rear of the HDD.
Figure 3-5: HDD Retention Screws
Step 5:
Insert the HDD into the iSignager-800WL-N270
.
Figure 3-6: HDD Installation
