IEI Technology iSDV-200CTR, User Manual, Page: 22 / 62

iSDV-200CTR
Page 14
3.4.2 Infrared Connectors
The iSDV-200CTR has one IR-out connector and one IR-in connector, both in 3.5 mm
jacks.

IR In: for connecting an IR receiver

IR Out: for connecting an IR blaster.
Pin Description
IR Receiver Cable
1 Power
2 Infrared signal
3 Ground
Table 3-3: IR Receiver Cable Pinouts
Pin Description
IR Blaster Cable
1 Infrared signal
2 Ground
Table 3-4: IR Blaster Cable Pinouts
WARNING!
Incorrect installation of IR receiver or IR blaster may result in failure of the IR
devices. Ensure all installed devices and cables are compatible with the
specifications of the SDV-200CTR.