IEI Technology IS-453S-8G, User Manual

Page: 42 / 57

IS-453S-8G Industrial NAS
Page 34
4.1.1 SO-DIMM Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the IS-453S-8G. Please make sure the purchased SO-DIMM complies
with the memory specifications of the IS-453S-8G.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Step 1:
Loosen the four screws on the bottom and the two screws on the rear panel of
the NAS with a Phillips screwdriver and lift the bottom off.
Figure 4-1: Bottom Panel Removal