IEI Technology IRS-100-ULT3, User Manual

Page: 100 / 108

IRS-100-ULT3 Railway Surveillance System
Page 87
ƒ
DO NOT
:
o
Drop the IRS-100-ULT3 against a hard surface.
o
Strike or exert excessive force onto the LCD panel.
o
Touch any of the LCD panels with a sharp object
o
In a site where the ambient temperature exceeds the rated temperature
B.1.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
IRS-100-ULT3 may result in permanent damage to the IRS-100-ULT3
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IRS-100-ULT3. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the IRS-100-ULT3 is opened and any of the electrical components
are handled, the following anti-static precautions are strictly adhered to.
ƒ
Wear an anti-static wristband
: Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.
ƒ
Self-grounding
: Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.
ƒ
Use an anti-static pad
: When configuring or working with an electrical
component, place it on an anti-static pad. This reduces the possibility of ESD
damage.
ƒ
Only handle the edges of the electrical component
: When handling the
electrical component, hold the electrical component by its edges.