IEI Technology IQ7-DB-MITX User Manual Download Page 95

Page: 95 / 139

IQ7 Design Guide

Page 83

DMA Mode [Auto]

Use the

DMA Mode

BIOS selection to adjust the DMA mode options.

Auto D

EFAULT

BIOS auto detects the DMA mode. Use this value if the IDE

disk drive support cannot be determined.

SWDMA0

Single Word DMA mode 0, max transfer rate: 2.1 MB/s

SWDMA1

Single Word DMA mode 1, max transfer rate: 4.2 MB/s

SWDMA2

Single Word DMA mode 2, max transfer rate: 8.3 MB/s

MWDMA0

Multi Word DMA mode 0, max transfer rate: 4.2 MB/s

MWDMA1

Multi Word DMA mode 1, max transfer rate: 13.3 MB/s

MWDMA2

Multi Word DMA mode 2, max transfer rate: 16.6 MB/s

UDMA0

Ultra DMA mode 0, max transfer rate: 16.6 MB/s

UDMA1

Ultra DMA mode 1, max transfer rate: 25 MB/s

UDMA2

Ultra DMA mode 2, max transfer rate: 33.3 MB/s

UDMA3

Ultra DMA mode 3, max transfer rate: 44 MB/s (To use this

mode, it is required that an 80-conductor ATA cable is used.)

UDMA4

Ultra DMA mode 4, max transfer rate: 66.6 MB/s (To use this

mode, it is required that an 80-conductor ATA cable is used.)

UDMA5

Ultra DMA mode 5, max transfer rate: 99.9 MB/s (To use this

mode, it is required that an 80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the

S.M.A.R.T

option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel.

S.M.A.R.T

predicts

impending drive failures. The

S.M.A.R.T

BIOS option enables or disables this function.

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

Summary of Contents for IQ7-DB-MITX












































































































































Search results

Summary of Contents for IQ7-DB-MITX

Reviews:

Brands by name

Popular brands

IEI Technology IQ7-DB-MITX, User Manual

Search results

Summary of Contents for IQ7-DB-MITX

Reviews:

Brands by name

Popular brands