manualshive.com logo in svg

IEI Technology IOWA-MARK, User Manual, Page: 225 / 232

Share
Download
IEI Technology IOWA-MARK User Manual Download Page 225

 

 

IOWA-MARK Half-size CPU Card 

Page 205

A/V playback and editing applications. The default value should be appropriate for most 

applications.  

F.4.5 Delete RAID Setting & Partition 

 

 WARNING: 

If a RAID configuration is deleted, all data previously stored on the 

member drives of the RAID configuration will also be deleted. 

 

Step 1: 

Delete a RAID setting

. Use the arrow keys to highlight 

Delete RAID Setting & 

Partition

 and press 

E

NTER

. A flashing ‘E’ appears at the 

Drive Menu

 where the 

member drives to be removed can be chosen. 

Step 2: 

Confirm Delete

. The 

Data on RAID drives will be erased (Y/N)

 confirm box 

appears. Press 

Y

.

Step 0:

 

F.4.6 Delete All RAID Setting & Partition 

 

 WARNING: 

If a RAID configuration is deleted, all data previously stored on the 

member drives of the RAID configuration will also be deleted. 

Step 1: 

Delete RAID Settings

. Use the arrow keys to highlight 

Delete All RAID Setting 

& Partition

 and press 

E

NTER

.  

Step 2: 

Confirm delete

. The 

Data on RAID drives will be erased (Y/N)

 confirm box 

appears. Press 

Y

.

Step 0:

   

F.4.7 Rebuild RAID Array 

Summary of Contents for IOWA-MARK









































































































































































































































Reviews:

No comments