IEI Technology IOWA-MARK Page 127 User Manual Download

Page: 127 / 232

IOWA-MARK Half-size CPU Card

Page 107

Use the

IDE Primary Master/Slave

menu (

BIOS Menu 3

) to set or change the

master/slave IDE configurations.

BIOS Menu 3: IDE Channel Master

IDE HDD Auto-Detection [Press Enter]

Use the

IDE HDD Auto-Detection

option to enable BIOS to automatically detect the IDE

settings. Select

IDE HDD Auto-Detection

and press

NTER

BIOS automatically detects

the HDD type. Do not set this option manually.

IDE Primary Master [Auto]

Use the

IDE Primary Master

option to activate or deactivate the following drive channels:

Channel 0 Master

Channel 0 Slave

Channel 1 Master

Channel 0 Slave

Summary of Contents for IOWA-MARK









































































































































































































































Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands

IEI Technology IOWA-MARK, User Manual

Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands