IEI Technology IOWA-GX User Manual Download Page 85

Page: 85 / 212

IOWA-GX CPU Board

Page 67

5.2 Installation Considerations

NOTE:

The following installation notices and installation considerations should

be read and understood before the IOWA-GX is installed. All

installation notices pertaining to the installation of the IOWA-GX should

be strictly adhered to. Failing to adhere to these precautions may lead

to severe damage of the IOWA-GX and injury to the person installing

the motherboard.

5.2.1 Installation Notices

WARNING:

The installation instructions described in this manual should be

carefully followed in order to prevent damage to the IOWA-GX,

IOWA-GX components and injury to the user.

Before and during the installation please

the following:

Read the user manual

The user manual provides a complete description of the IOWA-GX

installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD)

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.

Place the IOWA-GX on an antistatic pad

When installing or configuring the motherboard, place it on an antistatic

pad. This helps to prevent potential ESD damage.

Turn all power to the IOWA-GX off

Summary of Contents for IOWA-GX





















































































































































































































Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands

IEI Technology IOWA-GX, User Manual

Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands