IEI Technology IOWA-GX User Manual Download Page 21

Page: 21 / 212

IOWA-GX CPU Board

Page 3

MODEL

IOWA-GX-466-128MB-R11

IOWA-GX-466S-128MB-R11

CPU Speed

333MHz

TTL Yes

Yes

Onboard Memory

128MB

SATA No

Yes

Table 1-1: IOWA-GX Model Specifications

1.1.2 IOWA-GX Benefits

Some of the IOWA-GX benefits:

Power efficient, fanless CPU lowers hardware and operational overhead costs

ISA expansion options available through compatible IEI backplanes

Support for both legacy ISA and DMA (direct memory access)

Multiple display output devices including VGA and TTL

RAID options including RAID 1 for increased data safety and RAID 0 for

improved drive performance for faster data access (on SATA models)

1.1.3 IOWA-GX Features

Some of the IOWA-GX features:

Half-size form factor

RoHS compliant

AMD Geode™ GX processor installed

VGA or TTL display

Low power consumption (0.9 Watts)

One 10/100BASE-T Ethernet controller on-board

Two SATA channels with transfer rates up to 150Mb/s on-board (SATA model)

Four USB 2.0 devices supported

Integrated audio

Summary of Contents for IOWA-GX





















































































































































































































Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands

IEI Technology IOWA-GX, User Manual

Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands