IEI Technology IOBA-10F-AD, User Manual

Page: 62 / 65

IOBA-10F-AD RISC-based Panel PC
Page 52

Except for the LCD panel, never spray or squirt liquids directly onto any other
components. To clean the LCD panel, gently wipe it with a piece of soft dry
cloth or a slightly moistened cloth.

The interior of the IOBA-10F-AD does not require cleaning. Keep fluids away
from the IOBA-10F-AD interior.

Be cautious of all small removable components when vacuuming the
IOBA-10F-AD.

Turn the IOBA-10F-AD off before cleaning the IOBA-10F-AD.

Never drop any objects or liquids through the openings of the IOBA-10F-AD.

Be cautious of any possible allergic reactions to solvents or chemicals used
when cleaning the IOBA-10F-AD.

Avoid eating, drinking and smoking within vicinity of the IOBA-10F-AD.
B.2.2 Cleaning Tools
Some components in the IOBA-10F-AD may only be cleaned using a product specifically
designed for the purpose. In such case, the product will be explicitly mentioned in the
cleaning tips. Below is a list of items to use when cleaning the IOBA-10F-AD.


Cloth – Although paper towels or tissues can be used, a soft, clean piece of
cloth is recommended when cleaning the IOBA-10F-AD.

Water or rubbing alcohol – A cloth moistened with water or rubbing alcohol
can be used to clean the IOBA-10F-AD.

Using solvents – The use of solvents is not recommended when cleaning the
IOBA-10F-AD as they may damage the plastic parts.

Vacuum cleaner – Using a vacuum specifically designed for computers is
one of the best methods of cleaning the IOBA-10F-AD. Dust and dirt can
restrict the airflow in the IOBA-10F-AD and cause its circuitry to corrode.

Cotton swabs - Cotton swaps moistened with rubbing alcohol or water are
excellent tools for wiping hard to reach areas.

Foam swabs - Whenever possible, it is best to use lint free swabs such as
foam swabs for cleaning.