IEI Technology IOBA-10F-AD, User Manual

Page: 28 / 65

IOBA-10F-AD RISC-based Panel PC
Page 18
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them ( Figure 3-4 and Figure 3-5 ).
Figure 3-4: IOBA-10F-AD Wall-mounting Bracket
Figure 3-5: IOBA-10F-AD-ET Wall-mounting Bracket