IEI Technology IOBA-10F-AD, User Manual

Page: 24 / 65

IOBA-10F-AD RISC-based Panel PC
Page 14
3.3 External I/O Connectors
This section provides an overview of the external I/O connectors of the IOBA-10F-AD.
3.3.1 9 V ~ 30 V DC Power Jack
Use the DC power jack to connect the system to a power source.
Figure 3-1: 9 V ~ 30 V DC Power Jack
3.3.2 AI Connectors (IOBA-10F-AD Only)
The IOBA-10F-AD model equips with three AI connectors in Grove interface. The pinouts
are shown below.
Pin Description
1 GND
2 IOT_AI-5V
3 IOT_A0/A2/A4
4 IOT_A1/A3/A5
Table 3-1: AI Connector (AI) Pinouts
3.3.3 Digital I/O Connectors (IOBA-10F-AD Only)
The IOBA-10F-AD model equips with two digital I/O connectors in Grove interface. The
pinouts are shown below.
Pin Description
1 GND
2 DIO_3V3
3 DIO_D5/D7
4 DIO_D6/D8
Table 3-2: DIO Connector (DIO2, DIO3) Pinouts