IEI Technology IMBA-XQ354 User Manual Download Page 93

Page: 93 / 245

IMBA-XQ354 Motherboard

Page 73

Figure 5-4: Insert the Socket LGA775 CPU

Step 8:

Close the CPU socket.

Close the load plate and engage the load lever by

pushing it back to its original position. Secure the load lever under the retention

tab on the side of CPU socket.

Step 9:

Connect the CPU 12 V cable to the 12

After the cooling kit is installed connect

the CPU cable to the CPU 12 V power connector.

Step 0:

5.3.2 Socket LGA775 CF-520 Cooling Kit Installation

WARNING:

It is strongly recommended that you DO NOT use the original heat

sink and cooler provided by Intel on the IMBA-XQ354.

The cooling kit includes a support bracket that is combined with the

heat sink mounted on the CPU to counterweigh and balance the load

on both sides of the PCB.

Summary of Contents for IMBA-XQ354






















































































































































































































































Search results

Summary of Contents for IMBA-XQ354

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-XQ354, User Manual

Search results

Summary of Contents for IMBA-XQ354

Reviews:

Brands by name

Popular brands