IEI Technology IMBA-XQ354, User Manual

Page: 89 / 245

IMBA-XQ354 Motherboard
Page 69
Before and during the installation of the IMBA-XQ354 DO NOT:

Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.

Use the product before verifying all the cables and power connectors are
properly connected.

Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the IMBA-XQ354 is properly installed.

All the items in the packing list are present

A compatible memory module is properly inserted into the slot

The jumpers have been properly configured

The IMBA-XQ354 is inserted into a chassis with adequate ventilation

The correct power supply is being used

The following devices are properly connected
o
RS-232 cables
o
USB cables
o
FDD cables
o
Power cables

The following external peripheral devices are properly connected to the
chassis:
o
VGA screen
o
Keyboard
o
Mouse
o
RS-232 serial communications device