IEI Technology IMBA-X9654 User Manual Download Page 181

Page: 181 / 266

IMBA-X9654 ATX Motherboard

Page 163

Available D

EFAULT

The specified IRQ is available to be used by

PCI/PnP devices

Reserved

The specified IRQ is reserved for use by Legacy ISA

devices

Available IRQ addresses are:

IRQ3

IRQ4

IRQ5

IRQ7

IRQ9

IRQ10

IRQ 11

IRQ 14

IRQ 15

DMA Channel# [Available]

Use the

DMA Channel#

option to assign a specific DMA channel to a particular PCI/PnP

device.

Available D

EFAULT

The specified DMA is available to be used by

PCI/PnP devices

Reserved

The specified DMA is reserved for use by Legacy

ISA devices

Available DMA Channels are:

DM Channel 0

DM Channel 1

DM Channel 3

DM Channel 5

DM Channel 6

Summary of Contents for IMBA-X9654











































































































































































































































































Search results

Summary of Contents for IMBA-X9654

Reviews:

IEI Technology IMBA-X9654, User Manual, Page: 181 / 266

Search results

Summary of Contents for IMBA-X9654

Reviews: