manualshive.com logo in svg

IEI Technology IMBA-Q870-i2, User Manual

Share
Download
IEI Technology IMBA-Q870-i2 User Manual Download Page 90

 

 

IMBA-Q870-i2 ATX Motherboard

Page 74 

Figure 4-17: SATA Power Drive Connection 

The SATA power cable can be bought from IEI. See Optional Items in Section 2.4. 

4.5 External Peripheral Interface Connection 

This section describes connecting devices to the external connectors on the 

IMBA-Q870-i2. 

4.5.1 Audio Connector 

The audio jacks on the external audio connector enable the IMBA-Q870-i2 to be 

connected to a stereo sound setup. Each jack supports both input and output. When 

connecting a device, the High Definition Audio utility will automatically detect input or 

output.    The lime green (top) audio jack does not support input from a microphone.    To 

install the audio devices, follow the steps below. 

Step 1: 

Identify the audio plugs

. The plugs on your home theater system or speakers 

may not match the colors on the rear panel. 

Summary of Contents for IMBA-Q870-i2



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands