IEI Technology IMBA-Q870-i2 User Manual Download Page 160

Page: 160 / 186

IMBA-Q870-i2 ATX Motherboard

Page 144

Figure 6-18: LAN Driver Installation

Step 12:

The

Finish

screen appears. Click

Close

to exit.

Step 13:

Right-click the other Ethernet controller that has question marks next to it as

shown in

Figure 6-15

. Repeat

Step 6

Step 12

to install the second Ethernet

controller driver.

Step 0:

6.6 USB 3.0 Driver Installation

WARNING:

Do not run this driver’s installer (Setup.exe) from a USB storage device

(ie. external USB hard drive or USB thumb drive). For proper

installation, please copy driver files to a local hard drive folder and run

from there.

To install the USB 3.0 driver, please follow the steps below.

Step 1:

Access the driver list. (See

Section 6.2

)

Step 2:

Click “

4-USB 3.0

”.

Summary of Contents for IMBA-Q870-i2



























































































































































































Search results

Summary of Contents for IMBA-Q870-i2

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-Q870-i2, User Manual

Search results

Summary of Contents for IMBA-Q870-i2

Reviews:

Brands by name

Popular brands