IEI Technology IMBA-Q670 User Manual Download Page 149

Page: 149 / 222

IMBA-Q670 ATX Motherboard

Page 131

Figure 6-26: USB 3.0 Driver Update Complete

6.8 Intel® AMT Driver and Application

6.8.1 Intel® Management Engine Components Installation

The package of the Intel® ME components includes

Intel® Management Engine Interface (Intel® ME Interface)

Serial Over LAN (SOL) driver

Local Manageability Service (LMS)

User Notification Service (UNS)

Intel® ME WMI provider

Intel® Active Management Technology NAC Posture Plug-in

Intel

Control

Center

Intel® Management and Security Status Application

To install these Intel® ME components, please do the following.

Step 1:

Access the driver list. (See

Section 6.2

)

Step 2:

Click “

iAMT

”.

Step 3:

Double click the setup file in the

ME_SW_IS

folder.

Summary of Contents for IMBA-Q670































































































































































































































Search results

Summary of Contents for IMBA-Q670

Reviews:

Related manuals for IMBA-Q670

Brands by name

Popular brands

IEI Technology IMBA-Q670, User Manual

Search results

Summary of Contents for IMBA-Q670

Reviews:

Related manuals for IMBA-Q670

Brands by name

Popular brands