IEI Technology IMBA-H110, User Manual

Page: 85 / 152

IMBA-H110 ATX Motherboard
Page 71
Step 1:
Before turning on the system power, short pin 2-3 of the Flash Descriptor
Security Override jumper.
Step 2: Update the BIOS and ME firmware, and then turn off the system power.
Step 3: Remove the metal clip on the Flash Descriptor Security Override jumper or
return to its default setting (short pin 1-2).
Step 4:
Restart the system. The system will reboot 2 ~ 3 times to complete the ME
firmware update. Step 0:
4.8.5 mSATA Setup Jumper
The mSATA setup jumper specifies whether to automatically detect the mSATA device
installed in the PCIe Mini slot. If the user shorts the mSATA setup jumper to force the
system to enable mSATA device, the S_ATA4 connector will be disabled.
Setting Description
Open Automatically detect mSATA device (Default)
Short 1-2
Force to enable mSATA device
(The S_ATA4 connector will be disabled)
Table 4-4: mSATA Setup Jumper Settings
Figure 4-17: mSATA Setup Jumper Location