IEI Technology IMBA-G410 User Manual Download Page 81

Page: 81 / 158

2011/8/172011/8/17

IMBA-G410 ATX Motherboard

Page 67

General help, only for Status Page Setup Menu and Option

Page Setup Menu

Load optimized defaults

F10

Save changes and Exit BIOS

Table 5-1: BIOS Navigation Keys

5.1.3 Getting Help

When

is pressed a small help window describing the appropriate keys to use and the

possible selections for the highlighted item appears. To exit the Help Window press

the

key again.

5.1.4 Unable to Reboot After Configuration Changes

If the system cannot be booted after changes are made, restore the CMOS defaults. The

CPU card should come with a restore CMOS settings jumper. Refer to

Section

4.4.2

for

more information.

5.2 Main BIOS Menu

Once the BIOS opens, the main menu (

BIOS Menu 1

) appears.

Summary of Contents for IMBA-G410































































































































































Search results

Summary of Contents for IMBA-G410

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-G410, User Manual

Search results

Summary of Contents for IMBA-G410

Reviews:

Brands by name

Popular brands