IEI Technology IMBA-C2360-i2, User Manual

Page: 84 / 182

IMBA-C2360-i2 ATX Motherboard
Page 68
Step 5: Removing the iRIS-2400 module . To remove the iRIS-2400 module, push both
handles outward. The module is ejected by a mechanism in the socket. Step 0:
NOTE:
After installing the iRIS-2400 module, use LAN2_USB2 port to
establish a network connection. Please refer to Section 4.15 for IPMI
setup procedures.
4.7 Full-size PCIe Mini Card Installation
The PCIe Mini card slot allows installation of either a full-size or half-size PCIe Mini card.
To install a full-size PCIe Mini card, please follow the steps below.
Step 1: Locate the PCIe Mini card slot . See Chapter 3 .
Step 2: Remove the retention screw . Remove the retention screw as shown in
Figure 4-8 .
Figure 4-8: Removing the Retention Screw