IEI Technology IMBA-C2260-i2, User Manual, Page: 87 / 166

IMBA-C2260-i2 ATX Motherboard
Page 73
Figure 4-16: SATA Power Drive Connection
The SATA power cable can be bought from IEI. See Optional Items in Section 2.4.
4.7 Intel
®
AMT Setup Procedure
The IMBA-C2260-i2 is featured with the Intel® Active Management Technology (AMT). To
enable the Intel® AMT function, follow the steps below.
Step 1: Make sure at least one of the memory sockets is installed with a DDR3 DIMM.
Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN1_USB1 .
Step 3: The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,
Step 4: Properly install the Intel® Management Engine Components drivers from the
iAMT Driver & Utility directory obtained from IEI Resource Download Center.
See Chapter 6 .
Step 5: Configure the Intel® Management Engine BIOS extension (MEBx). To get into
the Intel® MEBx settings, press <Ctrl+P> after a single beep during boot-up