IEI Technology IMBA-C2060 User Manual Download Page 71

Page: 71 / 209

IMBA-C2060 ATX Motherboard

Page 55

4.2.2 Socket LGA1155 Cooling Kit Installation

WARNING:

DO NOT attempt to install a push-pin cooling fan.

The pre-installed support bracket prevents the board from

bending and is ONLY compatible with captive screw type cooling

fans.

Figure 4-5: Cooling Kits (CF-1156A-RS and CF-1156E-RS)

The cooling kit can be bought from IEI. The cooling kit has a heatsink and fan.

WARNING:

Do not wipe off (accidentally or otherwise) the pre-sprayed layer of

thermal paste on the bottom of the heat sink. The thermal paste

between the CPU and the heat sink is important for optimum heat

dissipation.

To install the cooling kit, follow the instructions below.

Step 1:

A cooling kit bracket is pre-installed on the rear of the motherboard. See

Figure

4-6.

Summary of Contents for IMBA-C2060


















































































































































































































Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-C2060, User Manual

Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands