IEI Technology IMBA-C2060 User Manual Download Page 180

Page: 180 / 209

IMBA-C2060 ATX Motherboard

Page 164

Step 12:

The recovery tool main menu window is shown as below. Press any key to

reboot the system.

Figure B-21: Press Any Key to Continue

B.3 Setup Procedure for Linux

The initial setup procedures for a Linux system are mostly the same with the procedure for

Microsoft Windows. Please follow the steps below to setup the recovery tool for Linux OS.

Step 1:

Hardware and BIOS setup

. Refer to

Section

B.2.1

Step 2:

Install Linux operating system

. Make sure to install GRUB (v0.97 or earlier)

MBR type and Ext3 partition type. Leave enough space on the hard drive to

create the recover partition later.

NOTE:

If the Linux OS is not installed with GRUB (v0.97 or earlier) and Ext3,

the Symantec Ghost may not function properly.

While installing Linux OS, please create two partitions:

Partition

SWAP

Summary of Contents for IMBA-C2060


















































































































































































































Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-C2060, User Manual

Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands