IEI Technology IMBA-C2060 User Manual Download Page 124

Page: 124 / 209

IMBA-C2060 ATX Motherboard

Page 108

PCIe LAN PXE Boot [Disabled]

Use the

PCIe LAN PXE Boot

option to enable or disable the boot option for the PCIe LAN

PXE.

Disabled D

EFAULT

Disables PCIe LAN PXE Boot option

Enabled

Enables PCIe LAN PXE Boot option

PCIe USB3.0 Controller [Enabled]

Use the

PCIe USB3.0 Controller

option to enable or disable the PCI Express USB 3.0

controller.

Disabled

The onboard USB 3.0 controller is disabled

Enabled D

EFAULT

The onboard USB 3.0 controller is enabled

PCIe x4 Slot2 [Enabled]

Use the

PCIe x4 Slot2

option to enable or disable the PCI Express x4 Slot2.

Disabled

Disables the PCIe x4 Slot2

Enabled D

EFAULT

Enables the PCIe x4 Slot2

5.4.3 Integrated Graphics

Use the

Integrated Graphics

menu (

BIOS Menu 20

) to configure the video device

connected to the system.

Summary of Contents for IMBA-C2060


















































































































































































































Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-C2060, User Manual

Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands