IEI Technology IMBA-C2060 User Manual Download Page 101

Page: 101 / 209

IMBA-C2060 ATX Motherboard

Page 85

USB Support [Enabled]

Use the

USB Support

option to enable or disable USB support on the system.

Disabled

USB support disabled

Enabled D

EFAULT

USB support enabled

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support. Normally if this option is not enabled, any attached USB mouse or USB keyboard

does not become available until a USB compatible operating system is fully booted with all

USB drivers loaded. When this option is enabled, any attached USB mouse or USB

keyboard can control the system even when there is no USB driver loaded onto the

system.

Enabled D

EFAULT

Legacy USB support enabled

Disabled

Legacy USB support disabled

Summary of Contents for IMBA-C2060


















































































































































































































Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-C2060, User Manual

Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands