IEI Technology IMBA-9654 User Manual Download Page 178

Page: 178 / 260

IMBA-9654 ATX Motherboard

Page 158

BIOS Menu 20:NorthBridge Chipset Configuration

Memory Remap Feature [Enabled]

Use the

Memory Remap Feature

option to allow the overlapped PCI memory above the

total physical memory to be remapped.

Enabled D

EFAULT

Overlapped PCI memory can be remapped

Disabled

Overlapped PCI memory cannor be remapped

Memory Hole [Disabled]

Use the

Memory Hole

option to reserve memory space between 15MB and 16MB for ISA

expansion cards that require a specified area of memory to work properly. If an older ISA

expansion card is used, please refer to the documentation that came with the card to see if

it is necessary to reserve the space.

Summary of Contents for IMBA-9654





































































































































































































































































Search results

Summary of Contents for IMBA-9654

Reviews:

IEI Technology IMBA-9654, User Manual, Page: 178 / 260

Search results

Summary of Contents for IMBA-9654

Reviews: