IEI Technology IMBA-9654 User Manual Download Page 120

Page: 120 / 260

IMBA-9654 ATX Motherboard

Page 100

Figure 5-16: SATA Power Drive Connection

5.7.6 USB Cable (Dual Port)

The IMBA-9654 is shipped with a dual port USB 2.0 cable. To connect the USB cable

connector, please follow the steps below.

Step 1:

Locate the connectors

. The locations of the USB connectors are shown in

Chapter 3

WARNING:

If the USB pins are not properly aligned, the USB device can burn out.

Step 2:

Align the connectors

. The cable has two connectors. Correctly align pin 1on

each cable connector with pin 1 on the IMBA-9654 USB connector.

Step 3:

Insert the cable connectors

. Once the cable connectors are properly aligned

with the USB connectors on the IMBA-9654, connect the cable connectors to the

onboard connectors. See

Figure 5-17

Summary of Contents for IMBA-9654





































































































































































































































































Search results

Summary of Contents for IMBA-9654

Reviews:

IEI Technology IMBA-9654, User Manual, Page: 120 / 260

Search results

Summary of Contents for IMBA-9654

Reviews: