IEI Technology IMBA-9454ISA User Manual Download Page 260

Page: 260 / 281

IMBA-9454ISA ATX Motherboard

Page 240

Step 3:

Save and Exit BIOS

. After the

SATA

support option is enabled, save and exit

the

BIOS

Step 4:

Reboot the system

. Reboot the system after saving and exiting the

BIOS

Step 5:

Press Ctrl+I

. During the system boot process, press

Ctrl+I

when prompted to

enter the RAID configuration software.

Step 6:

Configure the RAID settings

. Use the Intel® Matrix Storage Manager to

configure the RAID array. Brief descriptions of configuration options are given

below.

Step 7:

Install the OS

. After the RAID array has been configured, install the OS. To do

this, please refer to the documentation that came with the OS.

Step 0:

G.4 RAID Configuration

G.4.1 Creating a RAID Volume

WARNING!

All data previously stored on the member drives of a RAID configuration are

destroyed during the RAID initialization process. If “used” drives are used to

create a RAID array, make sure the data has been moved or backed up

before creating a RAID array out of the disk drives.

Summary of Contents for IMBA-9454ISA


























































































































































































































































































Search results

Summary of Contents for IMBA-9454ISA

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-9454ISA, User Manual

Search results

Summary of Contents for IMBA-9454ISA

Reviews:

Brands by name

Popular brands