IEI Technology IMBA-9454G, User Manual

Page: 127 / 205

IMBA-9454G Motherboard
Page 109

Type [Auto]
Use the Type BIOS option to select the type of device the AMIBIOS attempts to boot from
after the Power-On Self-Test (POST) is complete.

Not Installed
BIOS is prevented from searching for an IDE disk
drive on the specified channel.

Auto D
EFAULT
The BIOS auto detects the IDE disk drive type
attached to the specified channel. This setting should
be used if an IDE hard disk drive is attached to the
specified channel.

CD/DVD
The CD/DVD option specifies that an IDE CD-ROM
drive is attached to the specified IDE channel. The
BIOS does not attempt to search for other types of
IDE disk drives on the specified channel.

ARMD
This option specifies an ATAPI Removable Media
Device. These include, but are not limited to:

ZIP

LS-120

LBA/Large Mode [Auto]
Use the LBA/Large Mode option to disable or enable BIOS to auto detect LBA (Logical
Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the
maximum drive capacity is 137 GB.

Disabled BIOS is prevented from using the LBA mode control on
the specified channel.

Auto D
EFAULT
BIOS auto detects the LBA mode control on the specified
channel.