IEI Technology imba-30104 User Manual Download

Page: 53 / 185

IMBA-30104 ATX Motherboard

Page 39

1 x Parallel port connector

1 x Serial port connector

4 x USB ports

1 x VGA connector

Figure 3-24: External Interface Connectors

3.3.1 Audio Connector

CN Label:

AUDIO_CV1

CN Type:

3 x audio jacks

CN Location:

See

Figure 3-25

The three audio jacks on the external audio connector enable the IMBA-30104 to be

connected to external audio devices as specified below.

Line In port (Light Blue):

Connects a CD-ROM, DVD player, or other audio

devices.

Line Out port (Lime):

Connects to a headphone or a speaker. With

multi-channel configurations, this port can also connect to front speakers.

Microphone (Pink):

Connects a microphone.

Summary of Contents for imba-30104


























































































































































































Search results

Summary of Contents for imba-30104

Reviews:

Related manuals for imba-30104

Brands by name

Popular brands

IEI Technology imba-30104, User Manual

Search results

Summary of Contents for imba-30104

Reviews:

Related manuals for imba-30104

Brands by name

Popular brands