IEI Technology IMB-C2060 User Manual Download Page 122

Page: 122 / 172

IMB-C2060 microATX Motherboard

Page 108

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:



Chipset



Graphic



LAN



Audio



USB

3.0



Intel®

AMT

Intel® Management Engine Components driver

Intel® IT Director application

Installation instructions are given below.

6.2 Software Installation

All the drivers for the IMB-C2060 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->My Computer->CD Drive->autorun.exe"

Summary of Contents for IMB-C2060













































































































































































Search results

Summary of Contents for IMB-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMB-C2060, User Manual

Search results

Summary of Contents for IMB-C2060

Reviews:

Brands by name

Popular brands