IEI Technology IKARPC-07A-BT, User Manual

Page: 36 / 108

IKARPC-07A-BT In-vehicle Panel PC
Page 26
3.7 Power-On Procedure
WARNING:
Make sure a power supply with the correct input voltage is being fed
into the system. Incorrect voltages applied to the system may cause
damage to the internal electronic components and may also cause
injury to the user.
To power-on the IKARPC-07A-BT, connect either the ACC power cable or the optional
cigarette lighter power cable from the IKARPC-07A-BT to the vehicle. The
IKARPC-07A-BT will automatically turn on once the power is connected.
When the system is connected to power source, press the power button on the top panel
for 4
–
6 seconds to power on/off the system.
3.7.1 Power State
The following table shows the relation of the power state and vehicle ignition system. The
auto start-up and shut down time delay can be set by the BIOS options (please refer to
Section 5.3.4
).
LOCK ACC ON START
ACC Signal Off On On Off
Car Cigarette Lighter Off On On Off
5 V Standby Power Off On after 1 second On On
Auto Start-up -- After 10~60 seconds (selectable) --
Auto Shut-down After 10~180
secs (selectable)
-- -- --
Table 3-5: Power State and Ignition System