IEI Technology IEM-945GSE User Manual Download Page 59

Page: 59 / 148

IEM-945GSE ETX 3.0 Module

Page 47

Security

Sets User and Supervisor Passwords.

Chipset

Changes the chipset settings.

Power

Changes power management settings.

Exit

Selects exit options and loads default settings

The following sections completely describe the configuration options found in the menu

items at the top of the BIOS screen and listed above.

6.2 Main

The

Main

BIOS menu (

BIOS Menu 1

) appears when the

BIOS Setup

program is entered.

The

Main

menu gives an overview of the basic system information.

BIOS Menu 1: Main

System Overview

The

System Overview

lists a brief summary of different system components. The fields in

System Overview

cannot be changed. The items shown in the system overview include:

Summary of Contents for IEM-945GSE





















































































































































Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands

IEI Technology IEM-945GSE, User Manual

Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands