IEI Technology IEM-945GSE User Manual Download Page 14

Page: 14 / 148

IEM-945GSE ETX 3.0 Module

Page 2

1.1 Overview

Figure 1–1: IEM-945GSE

The IEM-945GSE ETX 3.0 module provides the main processing chips and is connected

to a compatible ETX 3.0 carrier board. The IEM-945GSE is equipped with an 1.6 GHz

Intel® ATOM™ N270 CPU, Intel® 945GSE Northbridge and Intel® ICH7M Southbridge

and provides multiple legacy I/O options. SATA connectors on the IEM-945GSE provide

modern alternative for hard drives, supplementing the legacy IDE channels provided

through the ETX connectors. The ETX 3.0 standard allows the ETX 3.0 carrier board to be

designed, while leaving the choice of processor till the later stages of design. The

IEM-945GSE embedded module is designed for flexible integration by system developers

into customized platform devices.

1.2 Applications

The IEM-945GSE is designed to a ETX 3.0 carrier board for being embedded in

customized baseboards for flexible applications.

1.3 Benefits

Some of the IEM-945GSE embedded platform benefits include:

Low power, high performance

Easy integration into customized baseboards

Summary of Contents for IEM-945GSE





















































































































































Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands

IEI Technology IEM-945GSE, User Manual

Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands