IEI Technology IDS-310AI User Manual Download Page 52

Page: 52 / 109

IDS-310AI Embedded System

Page 38



USB Devices

The

USB Devices

field lists the USB devices that are enabled on the system



Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support. Normally if this option is not enabled, any attached USB mouse or USB keyboard

does not become available until a USB compatible operating system is fully booted with all

USB drivers loaded. When this option is enabled, any attached USB mouse or USB

keyboard can control the system even when there is no USB driver loaded onto the

system.



Enabled

EFAULT

Legacy USB support enabled



Disabled

Legacy USB support disabled



Auto

Legacy USB support disabled if no USB devices are

connected

Summary of Contents for IDS-310AI














































































































Search results

Summary of Contents for IDS-310AI

Reviews:

Related manuals for IDS-310AI

Brands by name

Popular brands

IEI Technology IDS-310AI, User Manual

Search results

Summary of Contents for IDS-310AI

Reviews:

Related manuals for IDS-310AI

Brands by name

Popular brands