IEI Technology IDS-310-AL, User Manual

Page: 78 / 114

IDS-310-AL Embedded System
Page 64

Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled
Normal POST messages displayed

Enabled D
EFAULT
OEM Logo displayed instead of POST messages

Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.

Disabled D
EFAULT
Ignore all PXE Option ROMs

Enabled Load PXE Option ROMs

Option ROM Messages [Force BIOS]
Use the
Option ROM Messages
option to set the Option ROM display mode.

Force
BIOS D
EFAULT
Sets display mode to force BIOS.

Keep
Current Sets display mode to current.

UEFI Boot [Disabled]
Use the UEFI Boot BIOS option to enable or disable UEFI boot.

Enabled Enable UEFI boot if the 1
st
boot device is a GPT
HDD.

Disabled D
EFAULT
Disable UEFI boot.

Boot Option Priority
Use the Boot Option Priority function to set the system boot sequence from the available
devices. The drive sequence also depends on the boot sequence in the individual device
section.