IEI Technology IDS-200-A70Mi, User Manual, Page: 42 / 89

IDS-200-A70Mi Digital Signage Player
Page 30
3.9 IPMI Setup Procedure
The IDS-200-A70Mi features Intelligent Platform Management Interface (IPMI) that helps
lower the overall costs of server management by enabling users to maximize IT resources,
save time and manage multiple systems. The IDS-200-A70Mi supports IPMI 2.0 through
the optional iRIS-2400 module. Follow the steps below to setup IPMI.
3.9.1 Managed System Hardware Setup
The hardware configuration of the managed system (IDS-200-A70Mi) is described below.
Step 1:
Install an iRIS-2400 module to the IPMI module socket (refer to
Section 3.5
).
Step 2:
Make sure at least one DDR3 DIMM is installed in one of the DIMM sockets. If
multiple DIMMs are installed, all of the DIMMs must be same size, same speed
and same brand to get the best performance.
Step 3:
Connect an Ethernet cable to the RJ-45 connector labeled
LAN 1
(
Figure 1-3
).
Figure 3-21: LAN 1 Location
3.9.2 Using the IEI iMAN Web GUI
To manage a client system from a remote console using IEI iMAN Web GUI, follow the
steps below.
Step 1:
Obtain the IP address of the IDS-200-A70Mi. It is recommended to use the IPMI
Tool on the managed system to obtain the IP address. To use IPMI Tool to obtain
IP address, follow the steps below: