IEI Technology ICEFIRE-T10A, User Manual

Page: 27 / 149

ICEFIRE-T10A Mobile Clinic Assistant
Page 13
WARNING:
When installing the ICEFIRE-T10A, make sure to:
ƒ
Turn the power off
: Chance of electrocution. Turn off the monitor
and unplug it from the power supply.
ƒ
Only let certified engineers change the hardware settings
:
Incorrect settings can cause irreparable damage to the product.
ƒ
Take anti-static precautions
: Electrostatic discharge can destroy
electrical components and injure the user. Users must ground
themselves using an anti-static wristband or similar device.
The installation steps below should be followed in order.
Step 1:
Unpack the tablet PC
Step 2:
Check all the required parts are included
Step 3:
Install and charge the battery packs
Step 4:
Connect peripheral devices to the side panels of the tablet PC
Step 5:
Connect the power cable
Step 6:
Configure the system
S te p 0 :
2.1 Unpack the Tablet PC
To unpack the tablet PC, follow the steps below:
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Step 1:
Carefully cut the tape sealing the box. Only cut deep enough to break the tape.