IEI Technology IceCare-10W series User Manual Download Page 14

Page: 14 / 107

ICECARE-10W Mobile Sales Assistant

Page 2

1.1 Overview

Figure 1-1: ICECARE-10W Series

The ICECARE-10W Series is a mobile sales assistant with a 10.1 inch touchscreen and

an IP 54 compliant front panel. The ICECARE-10W Series features an Intel® Celeron®

processor 1007U or Intel® Core™ i7-3517U processor with DDR3 SDRAM memory.

Storage needs are met by the preinstalled 32 GB mSATA PCIe Mini module with Windows

Embedded Standard 7 P operating system.

Wireless networking is enabled through an 802.11b/g/n wireless adapter. A Bluetooth v3.0

module provides a connection to Bluetooth devices. Two USB 2.0 ports and one Micro

HDMI port are available on the side panel for peripherals.

The ICECARE-10W Series also features an RFID reader, an optional barcode scanner, an

optional magnetic stripe card reader and an optional smart card reader for advanced data

acquisition.

Summary of Contents for IceCare-10W series












































































































Search results

Summary of Contents for IceCare-10W series

Reviews:

Related manuals for IceCare-10W series

Brands by name

Popular brands

IEI Technology IceCare-10W series, User Manual

Search results

Summary of Contents for IceCare-10W series

Reviews:

Related manuals for IceCare-10W series

Brands by name

Popular brands