IEI Technology IBM-Q354 User Manual Download Page 54

Page: 54 / 286

IMB-Q354 uATX Motherboard

Page 32

Figure 2-16: TPM Connector

The Intel® ICH9DO Southbridge supports TPM version 1.1 and TPM version 1.2 devices

for enhanced security. Three TPM are available from IEI. The three IEI TPM are listed

below:

Infineon TPM module

Sinosun TPM module

Winbond TPM module

For more information about these modules please refer to

Chapter 3

or contact the

IMB-Q354 reseller or vendor. Alternatively, please contact IEI at

[email protected]

2.8.3 Super I/O chipset

The ITE IT8712F Super I/O chipset is connected to the Intel® ICH9DO Southbridge

through the LPC bus. ITE IT8712F Super I/O chipset is shown in

Figure 2-17

below.

Summary of Contents for IBM-Q354































































































































































































































































































Search results

Summary of Contents for IBM-Q354

Reviews:

Brands by name

Popular brands

IEI Technology IBM-Q354, User Manual

Search results

Summary of Contents for IBM-Q354

Reviews:

Brands by name

Popular brands