IEI Technology IBM-Q354 User Manual Download Page 171

Page: 171 / 286

IMB-Q354 uATX Motherboard

Page 149

6.5.3 Hard Disk Drives

Use the

Hard Disk Drives

menu to specify the boot sequence of the available HDDs.

When the menu is opened, the HDDs connected to the system are listed as shown below:

1st Drive

[HDD: PM-(part number)]

2nd Drive [HDD: PS-(part number)]

NOTE:

Only the drives connected to the system are shown. For example, if only

two HDDs are connected only “

1st Drive

” and “

2nd Drive

” are listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available HDDs is shown. Select the first HDD the system boots from. If

the “

1st Drive

” is not used for booting this option may be disabled.

BIOS Menu 22: Hard Disk Drives

Summary of Contents for IBM-Q354































































































































































































































































































Search results

Summary of Contents for IBM-Q354

Reviews:

Brands by name

Popular brands

IEI Technology IBM-Q354, User Manual

Search results

Summary of Contents for IBM-Q354

Reviews:

Brands by name

Popular brands