IEI Technology IBM-Q354 User Manual Download Page 107

Page: 107 / 286

IMB-Q354 uATX Motherboard

Page 85

Figure 5-4: Insert the Socket LGA775 CPU

Step 8:

Close the CPU socket.

Close the load plate and engage the load lever by

pushing it back to its original position. Secure the load lever under the retention

tab on the side of CPU socket.

Step 9:

Connect the CPU 12V cable to the 12V power.

After the cooling kit is installed

connect the CPU cable to the CPU 12V power connector.

Step 0:

5.4.2 Socket LGA775 CF-520 Cooling Kit Installation

WARNING:

It is strongly recommended that you DO NOT use the original heat

sink and cooler provided by Intel® on the IMB-Q354.

IEI’s cooling kit (CF-520) includes a support bracket that is combined

with the heat sink mounted on the CPU to counterweigh and balance

the load on both sides of the PCB.

Summary of Contents for IBM-Q354































































































































































































































































































Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands

IEI Technology IBM-Q354, User Manual

Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands