IEI Technology HYPER-KBN, User Manual

Page: 54 / 139

HYPER-KBN
P a g e 42
4.5 Exte rn a l P e rip h e ra l In te rfa c e Co n n e c tio n
The following external peripheral devices can be connected to the external peripheral
interface connectors.

DVI devices

RJ-45 LAN cable

USB devices
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding HYPER-KBN external peripheral interface connector making
sure the pins are properly aligned.
4.5.1 DVI Dis p la y De vic e Co n n e c tio n
The HYPER-KBN has a single female DVI connector on the external peripheral interface
panel. The DVI connector is connected to a digital display device. To connect a digital
display device to the HYPER-KBN, please follow the instructions below.
S te p 1:
Locate the DVI connector . The location of the DVI connector is shown in
Chapter 3 .
S te p 2:
Align the DVI connector . Align the male DVI connector on the digital display
device cable with the female DVI connector on the external peripheral interface.
S te p 3: Insert the DVI connector. Once the connectors are properly aligned with the
male connector, insert the male connector from the digital display device into the
female connector on the HYPER-KBN. See Figure 4-5 .